• The image shows a Hose Assembly for Older Model MaxPro (Inlet & Outlet hoses). It is a set of two hoses that are used to connect a MaxPro to a faucet. The hoses are black and appear to be made of rubber. They are connected to each other at one end by a metal fitting. The other ends of the hoses have different fittings. I can’t tell from the image what the size of the fittings are.
1 1

Phoenix Systems

Hose Assembly for Older Model MaxPro (Inlet & Outlet hoses)

Hose Assembly for Older Model MaxPro (Inlet & Outlet hoses)

$18.99 USD
$18.99 USD
Sale Sold out
Shipping calculated at checkout.

Notice the brass attachment in the front hose if your hose has a brass piece in the front then order this kit. NEW UPGRADE look under the Accessories category above for the MaxPro Tip Assembly and you can get rid of the half luer nut and brass tip. P/N 6007

These are the front and rear replacement hoses for your MaxPro old version.

View full details
The image shows a mechanic using a brake fluid bleeding gun to bleed a brake caliper on a car.

Patented Reverse Bleeding

  • Truly makes bleeding brakes a one-man job
  • Reverse bleeding removes more trapped air than any other bleeding method
  • Works on every vehicle
Shop Break Bleeders
The image depicts a package of Coolant + Brake Fluid Test Strips by Phoenix Systems. It includes 15 strips with instructions for testing both coolant and brake fluid. To use, dip the designated end of the strip into the corresponding fluid, wait for the specified time, and compare the resulting pad color to a chart on the package to assess freeze/boil point, glycol content, corrosion levels, and the need for replacement.

Brake & Coolant Test Strips

Make sure your key fluids are in good working order.

Shop Test Strips

Trusted Since 1999

Our tools & tests have been used in big chain shops as well as by the avid car guy.